B15 Metallic Pump
Blagdon B15 Metallic AODD Pump
The Blagdon B15 Metallic air-operated double diaphragm (AODD) pump is a compact industrial pump designed for reliable transfer of chemicals, solvents, process fluids and other compatible liquids.
With flow rates up to approximately 60 litres per minute (16 gal/min) and maximum working pressure up to 8.6 bar (125 psi), the B15 provides dependable fluid transfer while maintaining a compact and portable design.
Aluminum and 316L stainless steel wetted configurations are available to suit different process requirements. Its bolted construction, self-priming capability and proven pneumatic air-valve system make it suitable for demanding industrial applications where reliability and straightforward maintenance are important.
Key Features & Benefits
- Maximum flow rate up to approximately 60 L/min (16 gal/min)
- Maximum working pressure up to 8.6 bar (125 psi)
- Self-priming operation for container emptying and transfer duties
- Bolted construction for reliable fluid containment
- Simple construction designed for easier servicing
- Reliable pneumatic air-valve system
- Handles solid particles up to 2 mm (0.08″)
- Aluminum and 316L stainless steel wetted options available
- Compact and portable design
- Wall or surface mounting capability
- Exhaust-air silencer supplied as standard
- X15 ATEX-approved configurations available for applicable hazardous-area installations
Metallic Construction Options
| Aluminum | Lightweight metallic construction suitable for compatible general industrial fluids, oils, solvents and process-transfer duties. |
| 316L Stainless Steel | Higher corrosion-resistance option for compatible chemical and process applications requiring stainless steel wetted components. |
| Valve Type | Ball valve |
| Diaphragm Options | Buna-N, EPDM, Neoprene, Polyurethane, Santoprene, PTFE, one-piece PTFE and Viton depending on configuration |
| Valve Ball Options | Buna-N, EPDM, Neoprene, PTFE, Viton, Acetal and stainless steel depending on pump configuration |
Final wetted-material, diaphragm, ball and seat selection should be confirmed against the actual process fluid, chemical concentration, operating temperature and application conditions.
Typical Applications
- Chemical transfer
- Solvent transfer
- General industrial fluid transfer
- Container and drum emptying
- Tank transfer and unloading
- Paints, inks and coatings
- Lubricants and compatible oils
- Process-fluid transfer
- OEM and packaged equipment systems
- Applicable hazardous-area installations using the correct X15 ATEX configuration
Aluminum vs Stainless Steel
Aluminum: Provides a lightweight metallic pump construction for many compatible general industrial fluid-transfer applications where portability and lower pump weight are useful.
316L Stainless Steel: Provides enhanced corrosion resistance for compatible chemicals and industrial process fluids where stainless steel wetted components are preferred.
Technical Specifications
| Specification | Details |
|---|---|
| Maximum Delivery | Up to approximately 60 L/min (16 gal/min) |
| Maximum Working Pressure | 8.6 bar (125 psi) |
| Maximum Solid Particle Size | 2 mm (0.08″) |
| Air Inlet | 1/4″ BSP(F) / NPT |
| Temperature Limits | Determined by selected elastomer configuration |
| Dry Suction Lift | 4.6 m (15.1 ft) |
| Wet Suction Lift | 6.1 m (20 ft) |
| Fluid Inlet / Outlet | 1/2″ BSP / NPT |
| Installation | Wall or surface mounted |
| Included Accessory | Exhaust-air silencer |
| Shipping Dimensions | 320 × 200 × 340 mm (12.6″ × 7.9″ × 13.4″) |
Flow capacity and pump weight can vary by aluminum or stainless steel construction and individual model configuration. Published performance values are based on manufacturer test conditions.
Need Help Selecting the Blagdon B15 Metallic Pump?
Not sure whether aluminum or stainless steel is suitable for your application?
ABS Engineering can help review your required flow, fluid properties, chemical compatibility,
diaphragm materials, temperature and operating conditions.