0
VANEMAG Sealless Sliding Vane Magnetic Drive Pump for High-Pressure Industrial Use
Technical Characteristics ITechnical Characteristics IIOperation Manual


VANEMAG Sealless Sliding Vane Magnetic Drive Pump for High-Pressure Industrial UseVANEMAG

Pump construction, operating limits and performances
Close-coupled drivers are conventional drivers mounted directly to pumps frame. No base, coupling or guards are required for this mounting style.

VANEMAG Operating Limit

  • Connections: Threaded BSP (GAS) & NPT
  • Max viscosity 10000 cSt
  • Max system pressure: 50 bar (standard), 150 bar (HP Version).

Higher pressure version available on request.

  • Flow up to 3000 l/h
  • Head up to 14 bar.
  • Temperature range from -147 °F (-100 °C) to +392°F (+200 °C)
  • Electric motors: from 0,25 up to 2,2 kW

Sealless Sliding Vane pump with permanent magnet drive system, no mechanical seal.

The separation of liquid chamber/atmosphere by means of an isolation shell is the best solution to pump aggressive, explosive and toxic liquids, hydrocarbons, heat transfer liquids and liquids difficult to seal.

Suitable for a variety of applications, including reverse osmosis systems, cooling circulation and sampling application in refinery. A wide range of pumps covers the different performances.Epoxy primer and polyacrylic enamel water-based painting for the best quality resistance linked to the environmental respect.

The integrated by-pass allows to adjust the differential pressure, it is possible to set-up the preferred limit to avoid over-pressure conditions.

Pump port on the top for a very compact design.

The sealing system with O-Rings prevents from leaking in the atmosphere different materials available:

  • VITON®
  • EPDM
  • FEPCF8M Pump Casing & Cover High quality casting components. Other materials :
  • Hastelloy®C276
  • Incoloy®825
  • Duplex, or others available on request.

QUICK CHANGE CARTRIDGE KIT 

To guarantee an easy and fast maintenance.
  • Standard Version: CARTRIDGE PHENOLIC GRAPHITE, ROTOR SS316.
  • “1 SiC” Version (For low viscosity or for chemical resistance): CARTRIDGE METALLIZED CARBON, ROTOR SS316 W/SiC BEARINGS.
  • “2 SiC” Version (extreme differential pressure): CARTRIDGE METALLIZED CARBON or PHENOLIC GRAPHITE, ROTOR SS316 W/SiC BEARINGS VS SiC STATIONARY BEARINGS.

The rear shell is made of one single piece, no welding, ellipsoidal profile that has been studied to withstand higher pressures than the traditional one.

Available two versions, AISI 316 the standard construction, and Hastelloy®C276 for high pressure version – providing a safe and efficient solution – max system pressure 150 bar.

Titanium Alloy is an upgrade when higher pressure ratings and increased efficiency are required.

High power synchronous magnetic coupling designed by our Technical Office and with rare earth magnetic elements mechanically locked.

The high performance magnets can operate at liquid temperature of up to 392 °F (200 °C). Connections available: Threaded BSP(GAS) or NPT.

Assembling foot allows to have the two versions available for motor B3B5 or B5.

Operation Manual VANEMAG-V IN LINE

Brochure VANEMAG

Performance Curve VANEMAG

Looking for a reliable sealless sliding vane pump for aggressive or high-pressure fluids? Contact us to discuss VANEMAG pump solutions.