Terra-Titan Cantilever Vertical Sump Pump
The Flowserve TKL Terra Titan vertical cantilever sump pump is ruggedly built to provide economical reliability for mining, process and general industries.
Applications, slurry and corrosive sump duties
- Mining, slurry transfer, dewatering and pit sump pumping
- Chemical processing, corrosive sump collection and transfer
- Wastewater treatment, sump and trench duties
- Pulp and paper, effluent and process area sump pumping
- Primary metals and heavy industry, scale recycle and plant sumps
- Power generation, water systems and selected FGD services
Key features of the Terra Titan cantilever sump pump
- One piece cantilever shaft design, oversized and rigid to help reduce vibration and support run dry capable operation
- Double suction open impeller, hydraulically balanced to help resist air lock and solids accumulation
- Renewable Terraprene shaft sleeve, helps protect the shaft from wear and extends service life
- External impeller adjustment, quick clearance maintenance without complex disassembly
- Heavy duty bearings, self aligning grease lubricated roller bearings for long operating life
Why choose a vertical cantilever sump pump
- Common selection for abrasive slurry and corrosive sump duties where standard pumps fail early
- Cantilever design supports simpler maintenance access above the sump
- Good option when uptime matters for mining and process operations
Operating parameters
- Flows to 250 m3/h (1100 gpm)
- Heads to 45 m (150 ft)
- Pressures to 5 bar (70 psi)
- Temperatures to 100 C (212 F)
- Sizes from 40 mm (1.5 in) to 125 mm (5.0 in)
- Sump depths from 700 mm (28 in) to 1800 mm (72 in)
Actual performance depends on size selection, hydraulics, materials and slurry properties. For quotation and correct selection, please share the details in the Selection Guide tab.
FAQ
Q1, What is the Terra Titan pump used for
A, It is used for abrasive and corrosive sump duties such as slurry transfer and dewatering, common in mining, chemical processing, wastewater and power generation.
Q2, Is Terra Titan a cantilever sump pump
A, Yes. It is a vertical cantilever sump pump. This design supports sump operation with many serviceable parts located above the sump.
Q3, I am searching for a vertical cantilever sump pump supplier, what should I provide
A, Provide flow, head, sump depth, fluid SG, viscosity, solids content, operating temperature, and corrosion or abrasion concerns so the correct pump size and materials can be selected.
Selection guide for vertical cantilever sump pump quotation
To size the correct Terra Titan cantilever sump pump and confirm materials, please prepare the information below. This helps speed up quotation and reduces the risk of mis selection.
- Flow rate, m3/h or gpm
- Differential head, m or ft
- Sump depth, required immersion length and mounting arrangement
- Suction conditions, pit layout and minimum liquid level
- Fluid specific gravity, and temperature
- Viscosity, if applicable
- Solids content, percent solids, particle size and abrasiveness
- Corrosion concern, chemical composition and pH if available
- Material requirement, metallurgy preference if specified by plant standards
Once you share the data above, we can recommend a suitable Terra Titan configuration and confirm sizing support.
Contact us for quotation and selection support
TKL Terra Titan Vertical Cantilever Shaft Sump Pump, Sales Bulletin
Need a vertical cantilever sump pump supplier for abrasive slurry or corrosive sump duty. Send your flow, head, sump depth and solids content and we will recommend the right Terra Titan solution.
Contact us now