T MAG-P
Technical Characteristics ITechnical Characteristics IIDocumentation
T MAG-P
Pump Construction
Close-coupled magnetic drive pump — no mechanical seals required. Driver mounts directly to the pump frame without needing a baseplate, coupling, or guards.
Connections:
- Threaded BSP (GAS) & NPT
- Universal Flanges (DIN PN 16 & ANSI 150 compatible)
Operating Limits
- Max viscosity: 200 cSt
- Max system pressure: 5 bar
- Max flow rate: up to 13 m³/h
- Max head: up to 53 m
- Temperature range: -30 °C (?22 °F) to +90 °C (+194 °F)
- Electric motors: 0.18 – 9.2 kW
- ATEX version available: II – / 3G cbk II C T5
Design & Materials
Horizontal sealless pump made from high-thickness PP or PVDF, suitable for aggressive, high-purity, or hard-to-seal liquids. Ideal for chemical and pharmaceutical industries.
- Permanent magnet drive — no mechanical seal
- Isolation shell separates liquid from atmosphere
- Long service life with high corrosion resistance
- Eco-friendly epoxy primer + polyacrylic water-based coating
- One-piece solid bar casing in PP or PVDF
RWP QUICK CHANGE CARTRIDGE KIT
Simplified maintenance design using PP and PVDF materials. O-Ring sealing prevents leakage.
Sealing options: EPDM, VITON®, FEP
Rear shell: Thermoplastic PP GFR or PVDF FCR — zero magnetic losses. Outer cover is fiber-reinforced composite material with ellipsoidal profile.
Magnetic Coupling: High-power synchronous magnetic coupling with rare earth magnets to ensure magnetic balancing, minimize bearing wear, and reduce heat.
Shaft/Bearing Options:
- PTFEC – Alumina 99.7% (standard)
- Carbon – Alumina 99.7%
- Silicon Carbide (SSiC – SSiC)