Sandpiper HP10 High Pressure Metallic AODD Pump
Sandpiper Metallic AODD Pump, High Pressure Pump, the HP10
Sandpiper Metallic AODD Pump, the HP10, is a metallic 2:1 high-pressure pump that provides nearly double the force in applications where pressure is a priority and excellent flow rates are required. This high-pressure air pump is ideal for thick, viscous fluids with high specific gravity, high head pressure applications and moving fluids over long distances. The pump incorporates two additional air chambers and one extra air-side driver diaphragm, doubling the surface area on which air pressure is exerted. The magnified pressure is delivered directly to the pumped fluid via the fluid diaphragms, allowing the Sandpiper HP10 to achieve high discharge pressure and excellent flow rates.
Some of the features highlight the advantages of the HP10 AODD Pump in industrial applications;
- Nearly 2:1 high pressure with the full flow of a traditional 1″ pump and the capability to overcome a higher-pressure range.
- Simple construction and ease of maintenance.
- Self-priming and end-ported for improved flow.
- Pressures to 232 psi (16 bar), with flow rates up to 33 gpm (125 lpm).
- Bolted construction for greater integrity and reliability.
- Reliable pneumatic valve is fully serviceable.
- Safely deadheads – stalls against closed head without damage.
- Restart on demand.
-
Suitable for a wide range of applications:
- Available in either Aluminum or Stainless Steel wetted path material.
- Aluminum non-wetted center section.
-
Elastomeric options include:
- Buna
- Santoprene (PTFE Balls)
- Neoprene
- PTFE
- Standard weighted elastomeric or solid PTFE check valve balls and Stainless Steel seats for high specific gravity and viscous fluid applications.
- Available with NPT or BSPT threaded porting options.
- All models are ATEX approved.
| Port Size | 1″ NPT/BSPT |
| Capacity | 0 to 33 gpm (125 lpm) |
| Air Distribution Valve | No-lube, no-stall design |
| Solids-Handling | Up to 1/8″ (3 mm) |
| Heads Up To | 232 psi or 535 ft. of water (16kg/cm² or 163 meters) |
| Displacement/Stroke | 0.13 gallons (0.48 liters) |
| Max Operating Pressure | 116 psi (8 bar) |
| Shipping Weight |
Aluminum: Stainless Steel/Aluminum: |
Need Help Selecting the Sandpiper HP10?
Not sure if the Sandpiper HP10 is suitable for your high-pressure application?
ABS Engineering can help you check the right pump configuration, material and operating requirements.