MJ Overhung, Vertical Lineshaft, Hard Metal Slurry Pump

0
MJ Vertical Overhung Lineshaft Hard Metal Slurry Pump for mining and abrasive fluid applications

Introduction Features Literature

MJ Vertical Overhung Lineshaft Hard Metal Slurry Pump for mining and abrasive fluid applicationsMJ Overhung, Vertical Lineshaft, Hard Metal Slurry Pump

Brand: Worthington
Description:

The MJ Slurry Pump is a vertical overhung pump with a robust line shaft configuration and hard metal construction, engineered for continuous duty in abrasive slurry applications. Ideal for deep sumps and corrosive environments, the MJ pump provides high durability, extended service life, and reduced maintenance for industries such as mining, mineral processing, and chemical handling.

The type MJ hard metal, vertical lineshaft pump is designed to handle services containing coarse solids in suspension and is suitable for a broad range of wet and dry pit applications.

MJ Overhung Slurry Pump Applications

Dry Pit, Water Treatment, Wet Pit, Mining, Slurries, Pulp and Paper, Mineral Processing, Sump Service

  • Industries:
    Wastewater Collection and Treatment, Water Treatment, Slurry Transfer, Slurry Processing

Hard Metal Casing made from abrasion and corrosion resistant high chrome iron incorporates integrally cast straightening vanes in the suction nozzle to reduce pipe swirl and extend impeller life.

Closed Impeller has pump-out vanes on front and rear shroud to reduce stuffing box pressure and suction recirculation, as well as to balance axial hydraulic loads.

Standard Packing Type Stuffing Box is protected by replaceable wear plate and is drilled and tapped for L5 and 2L3 lantern ring positions. Provided with full and low flow flush connections. Optional 316 SS, Alloy 20 or Alloy C-276 materials.

Cast Iron Lower Bearing Housing is fitted with a rubber or urethane fluted bearing, which is contained in a rigid stainless steel shell and lubricated from an external clear liquid source.

Features:

  • Interchangeability of parts among R pump and M pump
  • Concentric casing design
  • Directly coupled or V-belt driven
  • Options
    • Acid resistant stuffing box kits
    • Hard metal expeller
    • Mechanical seal housing
    • Open and recessed impellers
  • Operating parameters
    • Flows to 225 m3/h (1000 gpm)
    • Heads to 30 m (100 ft)
    • Pressures to 10 bar (150 psi)
    • Temperatures to 110°C (225°F)
    • Solids from 2% to 70% by weight
    • Specific gravities from 1.0 to 2.7
    • Speeds to 1780 rpm

MJ Slurry Pump User Instructions

Handling highly abrasive slurries in deep sumps? The MJ pump delivers rugged performance with hard metal construction and vertical lineshaft design. Contact us today to customize your MJ configuration for long-lasting slurry service.