CA Nuclear Pump
CA Nuclear Pump
Brand |
Description |
| IDP | The CA pump was specifically built for nuclear safety injection service. This radially split, between-bearing, multistage Flowserve CA Nuclear Pump is extremely reliable and efficient, making it an excellent choice for sensitive nuclear pump applications that require high-performance pumps. |
CA Nuclear Diffuser Casing Applications
The CA pump is designed specifically for nuclear safety injection service. This radially split, between bearing, multistage design complies with ASME Section III< Class 2 and 3.
- Nuclear Service
- Industries:
Power Generation - Standards:
Nuclear
Precision Cast Diffusers minimize bearing spans, thereby increasing pump reliability and efficiency.
Suction and Discharge Connections can be located on the top or the bottom of the barrel and may be supplied with flanged or weld end design to suit installation requirements.
Forged and Hardened Stainless Steel Balance Drum is generously sized to completely unload the thrust bearing at all operating points.
Self-Aligning, Double-Acting Tilt-Pad Thrust Bearings are conservatively rated to carry axial loads that may be encountered during transient operating conditions.
Precision Cast Tandem Impellers are positively locked and keyed to the shaft.
Serrated Impeller Running Fits reduce the effects of rotor contact during system upsets or turning gear operation.
Flowserve CA Nuclear Pump Operating Parameters
- Flows to 5250 m3/h (23 000 gpm)
- Discharge pressures to 450 bar (6500 psi)
- Temperatures to 250°C (480°F)
- Speeds to 6000 rpm
