WXB-B Low-Flow, High-Head Process Barrel Pump

The WXB-B is a low-flow, high-head multistage process barrel pump designed for applications that require stable flow control at low capacity with high differential head. It is commonly referenced in searches related to Barske pump and Barske impeller due to its Barske style impeller hydraulic design, which supports stable operation in low-flow conditions.

If you are comparing WXB and WXB-B or searching for Flowserve WXB, this model is typically evaluated when the duty point demands very low flow with high head and high pressure performance.

• Type: Multistage barrel pump
• Duty focus: Low flow, high head, high pressure service
• Search intent alignment: Barske pump, Barske impeller, WXB, Flowserve WXB

Key Features

• Barske style impellers, designed to support stable hydraulic behavior and improved control in low-flow operation
• Multistage diffuser style inner case, intended to manage radial loads and maintain consistent stage performance
• Barrel pressure casing, commonly specified for high pressure services where robust containment and alignment are important
• Wear ring concept, supports restoration of clearances during maintenance to help reduce lifecycle cost
• Seal chamber flexibility, allowing multiple mechanical seal configurations depending on service and site standard
• Engineered nozzles, designed for process piping loads typically expected in critical service installations

Typical Applications

The WXB-B barrel pump is typically evaluated for high pressure, low capacity services in:

• Hydrocarbon processing and refinery services
• Gas processing and LNG related auxiliaries, subject to configuration and material selection
• Injection and transfer duties requiring low flow and high head
• Circulating barrel pump unit duties where low capacity stability is a key requirement

Operating Parameters

• Flow: 2.5 to 29 m3/h (11 to 128 gpm)
• Head: up to 1560 m (5116 ft)
• Pressure: up to 200 bar (2900 psi)
• Temperature: up to 200 C (392 F)
• Speed: up to 3600 rpm

Actual performance depends on size selection, stage configuration, materials and final arrangement. For correct selection, provide duty point, suction conditions, operating temperature, operating pressure and fluid properties.

FAQ

Q1, What is a Barske pump
A, Barske pump commonly refers to a low-flow, high-head pump concept using Barske style impellers. The intent is to support stable operation and controlled performance in very low-flow duty points.

Q2, What is the WXB-B pump used for
A, It is used for low capacity, high head, high pressure services in process industries where stable operation at low flow is required.

Q3, What is the difference between WXB and WXB-B
A, WXB-B is focused on lower flow and higher head duty points. WXB models are commonly used across broader flow ranges, depending on the hydraulic selection.

Q4, Why do people search Barske impeller
A, Barske impeller is associated with low-flow stability, which is why it appears in searches for low capacity high head pump performance and selection.

Q5, Is WXB-B suitable for circulating barrel pump unit service
A, It can be relevant when the circulating duty requires low flow and high head. Suitability depends on fluid, NPSH, temperature, pressure, materials and seal configuration.

WXB-B Pumps Bulletin

Need selection support for a low-flow, high-head duty point. Share flow, head, suction conditions, temperature, pressure and fluid details and we can help with configuration.
Contact us