HPX ISO 13709/API610 (OH2) Hydrocarbon Processing Pump
HPX ISO 13709/API610 (OH2) Hydrocarbon Processing Pump
| Brand: | IDP |
|---|---|
| Description: |
Engineered and built for reliable, safe performance, the Flowserve HPX pump also provides optimal emissions containment. This pump represents the industry standard for OH2 single-stage, overhung configurations, fully compliant with ISO 13709 / API 610. Designed for refining, petrochemical, and general industrial services, the HPX delivers superior hydraulic performance, reduced vibration, and long-term operating reliability across a wide range of high-temperature and corrosive applications. |
Engineered and built for reliable, safe performance, the HPX also provides optimal emissions containment. This pump represents the most comprehensive range of hydraulic coverage available to the industry, thereby permitting precise selection for best operating efficiency.
HPX Processing Pump Applications
Digester, Solvents, Distillation (oil and gas), Water Supply and Treatment (oil and gas), Drilling and Production, Water and CO2 Injection, Flue Gas Desulfurization, FPSO, Gas Treating and Sulfur Recovery, Gas to LiFlowserve HPX API 610 OH2 Pumpquids, Heat Transfer Fluids, Heavy Oil, Oil Sands and Shale, Acid Transfer, Hydrocracking, Boiler Feed Booster, Hydrotreating, Catalytic Cracking, LNG, Caustic and Chlor-alkali, Leaching Acid, Cooling Water (power), Chemical and Liquor (pulp and paper), Plating, Galvanizing and Other Coatings, Crude, Product and CO2 Pipeline, Residuum and Heavy Oil Upgrading, Desalination, Volatile Organic Compounds
- Industries:
Primary Metals, Pulp and Paper, Water Resources, Power Generation, Mining, Oil and Gas, Chemical and Liquor - Standards:
API682, API610
Centerline Supported Pump Casing withstands nozzle loads beyond ISO 13709/API 610 design requirements and minimizes shaft misalignment, extending rotor, bearing and seal life.
Suction Nozzle Guide Vane reduces inlet vortexing and ensures uniform flow into the impeller to achieve a reliable NPSH margin.
Precision Cast Impeller is dynamically balanced to limit vibration and assure smooth operation over wide flow range.
Raised Face Flanges are to ASME B16.5 criteria for Class 300 or 600. Surface finish meets ISO 13709/API 610 standards. ISO and JIS flanges are available.
Renewable Wear Rings for both the casing and impeller reduce replacement part costs.
ISO 21049/API 682 Seal Chamber accommodates a wide variety of seal configurations.
Operating Parameters
- Flows to 2000 m3/h (8800 gpm)
- Heads to 350 m (1100 ft)
- Pressures to 80 bar (1160 psi)
- Temperatures from -160°C (-250°F) to 450°C (840°F)
Need a proven API 610 OH2 pump for critical hydrocarbon service? The HPX delivers unmatched reliability and emissions containment. Let’s specify the right HPX model for your system’s flow, temperature and pressure requirements.