RJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump

0
RJC Vertical Cantilever Overhung Rubber Lined Slurry Pump for mining and industrial sump applications

Introduction Features Documentation

RJC Vertical Cantilever Overhung Rubber Lined Slurry Pump for mining and industrial sump applicationsRJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump

Brand: Worthington
Description:

The RJC Slurry Pump is a vertical cantilever pump with an overhung shaft and fully rubber-lined wet end, engineered for handling abrasive, corrosive slurries in mining, chemical and industrial sump applications. With no submerged bearings or seals, it offers long-lasting reliability and simplified maintenance in severe environments.

The type RJC rubber lined slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The RJC is particularly well suited for applications for which flushing liquids are not available or cannot be tolerated.

RJC Slurry Pump Applications

Dry Pit, Mining, Mineral Processing, Sump Service, Pulp and Paper, Wet Pit

  • Industries:
    Leaching Acid, Primary Processing, Slurry Processing, Slurry Transfer, Heavy Oil and Upgrading

Casing halves are cast iron fitted with replaceable, abrasion resistant rubber liners, which are pressure molded to steel backing plates and secured to casing externally by heavy-duty studs and nuts.

Rubber Closed Impeller is pressure molded to ductile iron skeleton and includes pump-out vanes on front and rear shroud to reduce stuffing box pressure and suction recirculation.

Standard Packing Type Stuffing Box is protected by replaceable wear plate and is drilled and tapped for L5 and 2L3 lantern ring positions. Provided with full and low flow flush connections.

RJC Slurry Pump Features:

  • Interchangeability of parts among R pump and M pump
  • Concentric casing design
  • Directly coupled or V-belt driven
  • Acid resistant stuffing box kits
  • Options
    • Hard metal expeller
    • Mechanical seal housing
    • Open and recessed impellers
  • Choice of liner materials
    • Natural Rubber
    • Neoprene
    • Hypalon
    • Nitrile
    • Chlorobutyl
    • Urethane
    • Ceramic

RJC Slurry Pump Operating parameters

      • Flows to 225 m3/h (1000 gpm)
      • Heads to 30 m (100 ft)
      • Pressures to 10 bar (150 psi)
      • Temperatures to 110°C (225°F), depending on material
      • Solids from 2% to 70% by weight
      • Specific gravities from 1.0 to 2.7
      • Speeds to 1780 rpm

RJC Slurry Pump Product Portfolio

Dealing with harsh slurry conditions? The RJC pump provides tough, low-maintenance performance for your most abrasive sump challenges. Let’s match your slurry requirements with the right RJC configuration today.